How To Maintain The Small Concrete Mixer Pump In One Machine

How to maintain the small concrete mixer pump in one machine:

Concrete mixer pump machine truck is widely applicable to mixing plasticity, dry hardness, fluidity concrete and light aggregate and mortar, so it can be seen that the topic of how to maintain and the concrete mixer pump is also a topic that is concerned by the majority of users. Here MITNIK CONSTRUCTION MACNINE would like to share with customers some basic knowledge about this aspect:

MITNIK Volumetric Concrete Mixer With Pump

1. Concrete mixer and pump for sale is necessary to check whether the transmission clutch and brake are sensitive and reliable before daily operation. Is the wire rope damaged? Is the track pulley good? Around the barrier-free and various parts of the lubrication situation.

2. Before daily operation, fill water in the mixing tank for 1 to 2 seconds, and check the stability of clutch and brake equipment operation at the same time.

3. In the operation process of concrete mixer and pump , should always pay attention to check and listen to motor, reducer, transmission gear noise is normal, temperature is not too high?

4. To ensure the cleaning of Combined Concrete Mixer And Pump body, and thoroughly clean the dirt and other impurities in the body.

As we all know, as the environment of concrete mixer pump combo is relatively bad, if the body is not normally clean, it is easy to cause cement agglomeration in the body, which will easily affect the efficiency of towed pump, and it is also very troublesome to clean up after cement agglomeration.

5. Before operation every day, check the oil, circuit and control equipment at the lubrication place, and add lubricating oil as required.

If the body is not kept lubricated, it will easily cause wear and tear of the connecting bearing, and the replacement and maintenance will be very troublesome, and the cost is high, compared to the amount of money add lubricants, this charge is how to add lubricants save money and effort.

MITNIK Concrete Mixer With Pump Machine Price

6. It is necessary to adopt two-level leakage protection for ground pump with mixing machine. Power supply should be switched on before operation, and careful inspection should be carried out. Only after passing the test can the ground pump operate normally.

7. After every time the pump is started up, you must check the operation of each component is normal?

8. When stopping the machine, be sure to check whether the blade of the mixer is bent and the screws are fang or loose.

Send your message to us:

INQUIRY NOW
  • * CAPTCHA: Please select the Star


Post time: Sep-16-2018
INQUIRY NOW
  • * CAPTCHA: Please select the Heart